KERSTAR SWARF VACUUM KSV-45/2W & KSV-45/2C

WET AND DRY CLEANERS

KSV 45/2 W
The KERSTAR KSV 45/2 W is a portable industrial unit designed to pick up engineering coolant (suds) and metal chippings (but not spirals). The motor unit is protected by a ball float system to cut off the suction to prevent over filling of the canister with liquid. Around the float cage is a perforated steel filter to prevent swarf being sucked into the vacuum motors. Sitting in the canister is a perforated steel basket with a lifting handle. This basket holds the metal chippings/swarf. When the basket is lifted out of the canister the liquid drains out. The canister is fitted with a drain hose and stopper to empty the canister of liquid.

KSV 45/2 C
The KERSTAR KSV 45/2 C is a portable industrial unit designed to pick up metal chippings and swarf (but not spirals) from milling machines, lathes etc. Where most of the liquid (suds) has drained into a sump. The motor unit is protected from the ingress of metal by a liquid resistant filter assembly. The filter assembly is protected from metal chippings by the cyclonic separator. The cyclonic separator directs most of the metal chippings downwards into the swarf basket in the canister. The swarf basket holds the metal chippings. When the basket is lifted out of the canister any liquid drains out through the perforations in the basket and into the canister. Liquid in the canister can be emptied by detaching the canister from the caddy trolley.