A powerful acidic cleaner,ACTION 100S effectively removes scale and ruststains from mosaic and concrete surfaces.Despite its strong acid cleaning properties, when used properly, special corrosion inhibitors makes ACTION 100 S safe to clean metals, such as on urinal gutters.
Areas of Use
ACTION 100 S should be used on mosaic, cement, concrete and many metal surfaces for the one time removal of rust stains and scale.
>> Optimum blend of acids and surfactants for maximum cleaning power
>> High viscosity for “clinging” effect allows for effective cleaning of vertical surfaces
>> Corrosion inhibiting properties makes it safe on most metals, except aluminium and magnesium
>> Concentrated for greater economy, dilutable for different applications
Directions for use
>> Dilute with cold water only. Dilution rates may vary, general guidelines are:
>> Heavy scale - dilute 1:1
>> Medium scale / rust deposits - dilute 1:4
>> Light rust stains / oil deposits - dilute 1:8
>> Apply with mop, cloth or acid proof sprayer and allow reaction on surface for 1-2 minutes. Scrub briskly with nylon pad or stiff brush, then flush well with water.Cleaned surface should be maintained regularly with an alkaline detergent such as EASY CLEAN or ACTION 130.
NOTE: Use ACTION 100 S for one time use on severe build-up, and not as a regular cleaning solution. It will etch marble, terrazzo and certain other surfaces. If unsure about suitability of product, test on an inconspicuous area first.
This product is acidic. Avoid ingestion, inhalation, eye and skin contact. Wearrubber gloves, protective clothing and provide adequate ventilation when handling.Flush or dilute with cold water if contacted in any way, and seek medical help if ingested, inhaled or contacted with eye.