POWER BRITE is a medium strength acidic cleaner with surfactants for removal of oxides, rust stains, fungus and light oil deposits from concrete, mosaic, and quarry tiles on floors and walls.
Applied properly and with care, POWER BRITE can also be used to clean and brighten certain aluminium and stainless steel surfaces.
>> Efficient and economical removal of rust, oxides, deposits and most other heavy stains.
>> Suited for more regular usage than most acidic cleaners, care must still be exercised.
Directions for use
>> Dilute with 3 to 8 parts of cold water, depending on amount of oxide film, grease and soil to be cleaned from the surface. Add product to water and not vice-versa.
>> Apply by mop, brush or acid-resistant sprayer. Start with a small central area of total surface and work outwards. Let solution act on the surface for 1 to 2 minutes then agitate briskly with a brush or scrubbing machine. Flush thoroughly with water. Do not let solution dry on the surface.
>> Renovated surface should be regularly maintained with an alkaline
detergent, such as EASY CLEAN or ACTION 130
>> POWER BRITE may be used to clean and brighten certain grades of stainless steel and aluminium. Consult your KLENCO representative or distributor for usage directions. Incorrect use will result in damage to the surface.
Note:POWER BRITE will etch marble, terrazzo and other types of smooth or polished surfaces. If unsure about suitability of POWER BRITE , test on an inconspicuous spot to ascertain if surface is adversely affected.
This product is acidic. Avoid ingestion, inhalation, skin and eye contact.Do not use bare hands to handle this product, wear rubber gloves and protective clothing when handling. If ingested, consume large amounts of cold water to dilute. If product contacts skin or eyes, flush thoroughly with cold water and seek medical help as soon as possible. Allow for adequate ventilation when using. Store in a cool place and keep container sealed.