A floor burnishing solution that cleans, removes dirt and black marks, and restores worn areas on floor finishes, thus effectively recoating and protecting the floor. SUN UP PLUS uses thermal tivation from the burnishing process to blend with and relaminate the finish already on the floor. Renews the high gloss “wet look”, hardness and durability of the finish.
Areas of Use
SUN UP PLUS can be used as a spray buff solution with high speed (300-400 rpm) or ultra high speed (1000-2000 rpm) burni shing machines on any floor already coated with a polymer based floor polish.
>> Cleans and reinforces existing floor finish producing a deep and brilliant “wet look” gloss that is extremely durable.
>> Achieves thermal activation with ultra high speed buffing machines for optimum results
>> Easy to use and compatible with most urethane or metal polymer based floor finishes.
Directions for Use
>> Apply undiluted SUN UP PLUS using trigger sprayer. Spray a light to medium mist over area to be maintained.
>> Burnish with buffing machine using open weave non-abrasive high speed burnishing pad, until a brilliant gloss is achieved.
>> Depending on traffic conditions, spray burnishing with SUN UP PLUS should be carried out at least 2 or 3 times a week.
Note: This product should not be used with solvent based floor finishes. Also, some floor finishes are not suitable for ultra high speed burnishing. In such cases burnish with high speed machines only
As with most chemical products, avoid ingestion and eye contact. If ingested, dilute by drinking water and seek medical help. If product enters eyes, flush with water and seek medical help if irritation persists.